How to make your own DIY cannabis topicals
The incredible health benefits and seemingly endless uses for cannabis are still being discovered, but one of the most prominent new trends is the emergence of cannabis-infused topicals.
Infused lotions, salves, or balms are a great item to keep on hand as they have been shown to provide immense relief from chronic or acute localized pain. Because topicals are applied directly to the skin, they won’t get you high, which means they’re a great pain reliever to use at work or during the day when you can’t responsibly consume cannabis to relieve painful symptoms.
Making your own cannabis-infused topical lotions and salves is not as difficult as you might think. If you’ve ever made cannabis-infused butter or oil, the recipe is remarkably similar and can be used in a variety of ways.
How to make a basic cannabis salve
- 7-10 grams of ground, dried cannabis
- 1 ½ cups of coconut oil
- 1/3 cup olive oil (optional)
- 1/3 cup beeswax
- 1 baking sheet
- 1 saucepan (or double boiler)
- 1 jar
- 1 cheesecloth
- A few drops of essential oil (your choice)
Preheat your oven to 240 degrees Fahrenheit and spread your dried ground cannabis on a baking sheet. When the oven is preheated, decarboxylate your cannabis in the oven for 25-30 minutes.
While your cannabis is in the oven, place your coconut and olive oil in the saucepan or double boiler over low heat and stir continuously.
Remove your decarboxylated cannabis from the oven and mix it into the coconut oil. Maintain a low heat and continue stirring the cannabis and oil mixture for 20 to 25 minutes.
Note: Keep the heat very low, especially when using a saucepan and not a double boiler–if the heat gets too high, you’ll scorch the cannabis and burn off the THC, decreasing the oil’s potency. This is especially pertinent if you’re using olive oil in your recipe, as olive oil has a lower smoke point than other oils.
After 25 minutes, remove from heat and pour the mixture through a cheesecloth into the jar. Set aside.
In the same saucepan or double boiler, add the beeswax and heat until it is melted. As the beeswax melts, slowly add the infused coconut oil.
You can also add essential oils to your mixture–we recommend lavender, peppermint, or tea tree oils. Just a few drops will do.
Once the beeswax and coconut oils are thoroughly mixed, remove from heat and transfer into containers for your infused salve.
How to make a cannabis-infused lotion or cream
In order to make your salve into an infused lotion or cream, add:
- 1 cup aloe vera gel
- 1 teaspoon vitamin E oil
- 2 tablespoons shea butter or cocoa butter
To increase the fluidity of your cream, increase the amount of olive oil (or any other kind of oil–we recommend vitamin E oil or almond oil) in your mixture.
Keep in mind that your lotion will still be fairly thick, so we don’t recommend trying to put it in a lotion pump.
If you’re not sure what containers to use, many containers used for cannabis flower can also be used for topicals and lotions. Our personal favorite is the classic 4 oz. glass canning jar, easily bought in bulk and useful for a number of purposes.
And there you have it!
Your cannabis salve won’t last forever, but storing it in a cool, dark place will help preserve its longevity. Just rub salve on the affected area, and sit back and relax while the activated THC works magic on your aches and pains.
Other creative ideas:
- Tinted lip balm: Adding frozen raspberries to your coconut oil and beeswax mixture is a quick and easy way to make your own naturally-tinted lip balm.
- Flavored lip balm: A teaspoon of honey will add sweetness to your balm, and if you’re feeling adventurous, try a teaspoon of cocoa powder for chocolate-flavored lips.
- Arthritis relief: If you suffer from arthritis or other aches and pains, consider adding a teaspoon of cayenne pepper for effective pain relief. Be careful, however, and keep any cayenne-infused lotions (or lotion-covered hands) away from your eyes.
- Headache relief balm: If you suffer from migraines, making a headache relief balm is fairly simple. Just add 15 to 20 drops each of peppermint, lavender, tea tree, and eucalyptus oil to your coconut and beeswax mixture. Apply sparingly to your temple and the nape of your neck for best results.
- Calming sleep balm: Add dried rose petals and chamomile oil or tea leaves for a calm, relaxing balm. Apply to the soles of your feet before bedtime for a soothing sleepytime aid.
Have you ever created your own cannabis-infused lotion or balm? Share your recipe in the comments!
Learn how to make your own cannabis-infused lotions, salves, and balms, plus some recommendations on adding a few special ingredients to create different flavors and scents.
How to Make Homemade Cannabis Salve (CBD or THC)
To grow and make your own medicine… that is the stuff that dreams are made of, am I right?! We like to use our organic homegrown cannabis in a variety of ways, but making topical cannabis salve is on the top of the list. Cannabis salve can help to reduce inflammation, soothe skin irritation, joint pain, and more! It also happens to be quite simple to make your own cannabis salve, and easy to customize it to suit your needs.
Read along to learn how to make cannabis salve in 4 simple steps. With this recipe, you can use marijuana, hemp, high CBD, high THC, raw cannabis, decarbed cannabis, or any combination thereof! (Depending on what is legal and available in your area of course.) Let’s talk about benefits of each of those, how cannabis salve works, and what awesome healing potential it has.
Disclosure: This post may contain affiliate links to products for your convenience, such as items on Amazon. Homestead and Chill gains a small commission from purchases made through those links, but at no additional cost to you.
What is Cannabis Salve
Maybe we need to step back a moment. How about, “what is a salve?”. A salve is simply the term for a healing solution that you put on your skin, including creams, ointments, or balms. Generally, salves are fairly thick, shelf-stable, and include nourishing oils such as coconut oil, olive oil, sweet almond oil, or others.
In our cannabis salve recipe, we prefer to use mostly coconut oil, because it is full of saturated fat that binds well with cannabinoids. It is also ultra-moisturizing. We also add a dash of olive oil to increase absorption and smoothness. To learn more about various carrier oils, check out our homemade calendula oil article – where I discuss the pros and cons of a dozen different oil options!
Salves also typically contain waxes or butters to bind the ingredients and make them semi-solid at room temperature. Beeswax is a popular option because it is readily available, easy to work with (especially when purchased in pastilles), and creates perfectly smooth results. See the ingredient list below for recommended vegan substitutions.
When cannabis is added to salve as an ingredient… voila! You’ve got yourself a cannabis salve. The most common way to add cannabis to a salve recipe is to create a cannabis-infused oil first, and then combine the oil with the other salve ingredients.
Therefore, that is exactly what we’re going to do in this recipe: make cannabis oil, and then the salve. But first: “what kind of cannabis should I use in my oil or salve?”
Using Decarboxylated or Raw Cannabis in Salve
How about a little bit of both?
If you aren’t familiar with the term, decarboxylation is the process of heating cannabis at an ideal time and temperature to transform raw cannabinoid compounds from their “acid” form to more active and potent versions. For example, CBDA and THCA are changed into CBD and THC respectively. Decarboxylation naturally occurs when cannabis is smoked or vaporized, but it needs to be accomplished by other means when using cannabis in oil or salves – such as by heating it in the oven. (Read more about decarboxylation here)
The medicinal benefits of decarboxylated THC and CBD are well-documented. Both are anti-inflammatory, anti-microbial, high in antioxidants, relieve pain, relax muscles, and suppress tumor growth. This is especially true when they’re used and work together, known as the “entourage effect“. THC is a particularly powerful analgesic (pain-reliever). CBD has even more expansive healing applications, and can help relieve seizures, rheumatoid arthritis, and psoriasis. That said, we definitely want to reap those benefits and use decarbed cannabis in this salve recipe!
On the other hand, emerging studies are revealing that raw THCA and CBDA have some pretty groovy perks too. THCA is showing a promising ability to reduce inflammation, muscle spasms, arthritis, and cancer. CBDA also fights inflammation and tumor growth.
Beyond CBD and THC, there are dozens of other compounds found in cannabis that may produce individual, interactive, or synergistic benefits, including phytocannabinoids, flavonoids, and terpenes. It should be noted that THC is psychoactive and CBD is not, though that doesn’t matter all that much when making a cannabis salve intended for topical use only.
Considering all of this, we like to use both decarbed and raw organic cannabis (containing both THC and CBD) to create a full-spectrum, well-rounded, ultra-healing finished product.
What Can Cannabis Salve Be Used For?
Cannabis salve is stellar at relieving many ailments! First of all, coconut oil and olive oil are extremely nourishing on their own – so you’re going to get plenty of moisture from your salve to heal dry, cracked, or otherwise irritated skin. If you add a few drops of essential oils to your salve, you’ll also get the benefit of aromatherapy.
The healing properties of your homemade cannabis salve may vary slightly depending on what type of cannabis you use. In general, cannabis salve can be used to treat or relieve the following :
- Rashes, itching, or other skin irritation
- General inflammation
- Sore joints
- Muscle aches
- Carpal tunnel syndrome
- Irregular cell growth (e.g. skin cancer cells)
Personally, I like to rub a little cannabis salve on my tight and sore neck muscles, shoulders, wrists, knees, elbows, ankles, bottom of my feet, and behind my ears. Hey, all this gardening (and sitting to blog) does a number on my body!
The beneficial effects of various cannabinoids. Chart courtesy of PotGuide
How Does It Work?
Did you know we all have an Endocannabinoid System? Yep. Just like we have an endocrine system, immune system, digestive system, and so on. Our bodies have natural receptors, literally made to interact with cannabinoid compounds. This includes both internal, naturally-synthesized cannabinoids and those from external sources – like those from marijuana or hemp. Neat, huh?
When cannabis salve or medicated topicals are applied to our skin, the THC, CBD, and other cannabinoids present in the solution penetrate the skin to bind and activate our localized endocannabinoid receptors. They won’t enter the bloodstream however, so topically-applied salve will not get you “high”.
HOW TO MAKE HOMEMADE CANNABIS SALVE
- 7-10 grams of decarboxylated cannabis (ground or torn to fairy small pieces). If your cannabis is not yet decarbed, see Step 1 in the instructions below.
- 1 ½ cups of coconut oil OR, 1 ½ cups of already-infused cannabis coconut oil (*see notes about using different types of oil below)
- Optional: 5 grams raw cannabis, dried and cured.
- 1/3 cup olive oil
- 1/3 cup beeswax pastilles (vegan option: replace with the same amount of organic soy wax, candelilla wax, or carnauba wax)
- Optional: Essential oils of choice. I like using this certified organic lavender oil. Tea tree, peppermint, rosemary, lemon, or eucalyptus are also great choices!
- Optional: 1 tablespoon of shea butter or 1 teaspoon of vitamin E oil for additional antioxidants and moisture
- A double-boiler, or make-shift double boiler – such as a glass pyrex bowl or stainless steel bowl perched on top of a saucepan with water below
- Cheesecloth (if your cannabis oil is not already made)
- Mixing bowl
- Glass jars or salve tins, for storage
- Recommended: probe thermometer
Makes: Approximately 2 cups (16 ounces) of finished salve
*Notes: If you want to scale this recipe up or down: the general rule of thumb for salve is to use about 1 part of beeswax to 4 or 5 parts oil, including both coconut and olive oil. Since we use virgin coconut oil that is solid at room temperature, we can get away with lesser beeswax and the salve will still set up well. If you use a different carrier oil that is liquid at room temperature, either omit the extra 1/3 cup olive oil mentioned above, or increase the amount of beeswax pastilles to 1/2 cup.
Step 1) Decarboxylate Your Cannabis
If you haven’t done so already, the first step is to decarboxylate the cannabis you intend to use in this salve recipe. Or at least some of it, if you want to also use some raw material.
Grind or tear up the cannabis into fairly small pieces. Spread it evenly on a baking sheet, and heat it in the oven on 250°F for 25-30 minutes. Easy, right?
Step 2) Create & Strain Cannabis-Infused Oil
If you tuned into our “How to Make Cannabis Oil” tutorial, you will recognize these steps. The process is virtually the same, except we are going to use slightly more coconut oil here. If you’re interested in making medicated edibles, check out that article!
When making cannabis oil, it is important to not overheat it. Because we are starting with already-decarboxylated cannabis, maintaining a lower temperature will preserve the already-active THC and CBD content as well as the terpenes. Avoid heating it over 200 degrees F. 120 to 180°F is even better.
That is where a double-boiler comes in handy! Even over the lowest flame, heating oil in a pot directly on the stove is much more difficult to prevent overheating, and can create “hot spots” – destroying our precious cannabinoids.
I suggest monitoring the oil temperature with a probe thermometer if possible. Because oils have a higher boiling point (or “smoke point”) than water, the oil will not appear to be as hot as it really is! For example, the oil may be well over 212 degrees but not visibly bubble and boil like water would at the same temperature.
Steps to Make Cannabis-Infused Oil:
- Add water to the bottom pan of your double-boiler. Now add 1.5 cups of coconut oil to the top section of the double-boiler. Heat until it melts.
Stir in 7–10 grams of decarboxylated cannabis to the melted oil. Add an optional few grams of raw ground cannabis if you desire.
Continue to heat the cannabis and oil over a low heat for 30 to 60 minutes, stirring occasionally. Use a probe thermometer to check the temperature, and adjust the heat as needed to maintain the oil below 200°F. We aim for a target temperature range of around 130 to 150°F and infuse for one hour.
When the time is up, line a strainer with cheesecloth and position it over a glass bowl. Pour the cannabis and oil mixture through the strainer. Gather the cheesecloth and gently squeeze out the excess oil from the cannabis. Warning: the oil will be hot, and your hands will get greasy! You may want to wear food-grade gloves.
Keep the strained cannabis oil aside for now. It will be added to the salve mixture soon.
Step 3) Mix the Salve Ingredients
Just like the last step, we want to avoid excessively heating the cannabis oil in order to preserve cannabinoids. If you happen to be using solidified cannabis-infused coconut oil that you previously made, I highly suggest mixing everything in a double-boiler once again (since you’ll need to heat it longer and hotter to re-melt your oil).
On the other hand, if you just made your cannabis oil and it is still liquified, you can do this step straight in a pot on the stove – keeping the heat as low as possible once the cannabis coconut oil is added.
In either a pot or double-boiler, add ⅓ cup of beeswax. Heat until it is completely melted. Now turn down the heat to low. Next, stir in 1.5 cups of strained cannabis coconut oil and ⅓ cup olive oil. Now is the time to add the optional vitamin E plus a few drops of optional essential oils as well. Stir until everything looks completely combined. Once it is, quickly remove the liquid salve from the heat and transfer it into your storage containers of choice.
Step 4) Cool & Store
When it is ready, I pour the liquid salve straight into these 2 ounce glass jars, or these 4 ounce glass jars. You can also use these shallow wide aluminum salve tins. The cannabis salve will harden as it cools, and then it is ready to use!
It is best to store your finished cannabis salve in a cool dark location because light degrades cannabinoids. The amber and cobalt jars we use block UV light, which protects the salve if I leave it out.
Note: Sometimes, the surface of the salve may crack just a little bit as it cools. See the photos below. I have found that salve in our 2-ounce glass containers don’t crack, but larger volumes may. This is really only an aesthetic “issue” if you care. Personally, I don’t mind. It disappears as soon as you begin to dig in and use it!
However, some folks may not like the appearance of the cracks – particularly if the cannabis salve is going to be sold or given as a gift. To avoid settling cracks, put the cannabis salve in a mixing bowl before transferring it into a storage container. Allow it to only partially cool and solidify, whip and mix it up, and then pack into your containers.
Step 5) Feel Good
Lather up! Apply a thin, even layer to the affected area. You should start to feel the results within 5 to 20 minutes, depending on the severity of your issue and strength of your salve. Repeat several times per day as needed.
Will this make me smell like weed?
Just slightly! I find our salve to have a mild cannabis odor, but nothing overpowering. The coconut aroma also stands out. If you add essential oils to your recipe, that can also help to mask the smell. I often apply salve after showering (including before going to work) and don’t think there is much of a noticeable odor after a half an hour or so. No one has ever said anything to me at least!
How long does cannabis salve last?
When stored in ideal cool and dark conditions, homemade cannabis salve should last up to a year. The potency will only slightly decrease during this time. I try to use clean hands when I dig into my salve jars, to avoid introducing any contamination that could make it potentially mold or spoil faster. You could also use a salve spoon.
Ready to make your own medicine?
I hope you found this tutorial to be useful, interesting, and informative! I also hope that it helps you soothe your trouble spots, whatever those may be. Finally, please remember to heed caution depending on your local laws, and always be careful with your cannabis products around curious kiddos or pets.
If you enjoy this article, be sure to check out:
Please feel free to ask questions, or spread the love by sharing or pinning this post! Thank you for tuning in.
Learn how to make your own healing cannabis salve, using marijuana or hemp. It helps reduce inflammation, skin irritation, joint pain, psoriasis, & more!